Valve sizing calculator

HD-1

VALVES FOR SEVERE SERVICE APPLICATIONS

API 6D/6DSS/6A

Image

HD-1
Side Entry ball valve
Floating design
SLURRY SERVICE

  • Forged body
  • Uni-directional and Bi-directional
  • Metal seated
  • Self-Relieving design
  • Refinery low, ambient or medium temperature
  • Above ground, buried or subsea service
  • Suitable down-stream body cavity flushing

HD-1
Side Entry ball valve
Floating design
CRITICAL SERVICE
HT, Coking, Cracking and Dirty service

  • Forged body
  • Uni-directional
  • Metal seated
  • Self-Relieving design
  • Refinery low, ambient or very high temperature
  • Above ground, buried or subsea service
  • Suitable up-stream body cavity flushing

FINITE ELEMENT ANALYSIS

Traditional design procedure is integrated with Finite Element Analysis into the design cycle of our products in order to support continuous improvements in terms of quality, safety, cost effectiveness and reliability.
Structural analyses were performed on the valve components in order to evaluate their strength under high pressure loading and to optimize the design.

TECHNICAL SPECIFICATIONS

SIZE RANGE & PRESSURE RATINGS

SLURRY SERVICE

SIZE
From 1 1/2” to 36”
From 1 13/16” to 9”

WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000

CRITICAL SERVICE

SIZE
From 1 1/2” to 48”
From 1 13/16” to 20”

WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000

TEMPERATURE RANGE

SLURRY SERVICE

LOW TEMPERATURE
Down to -46 °C

HIGH TEMPERATURE
Up to +200 °C

CRITICAL SERVICE

LOW TEMPERATURE
Down to -46 °C

HIGH TEMPERATURE
Up to +550 °C

OPERATION

Manual lever, gearbox, actuator
[electric, pneumatic, hydraulic, gas-over-oil actuators]

MATERIAL SELECTION

BODY
CARBON STEEL
A105
WCB
LCC
LF2
LF3
F60/F65
BALL/SEATS
CARBON STEEL
A105
LF2
LF3
F60/F65
STEM
CARBON STEEL
4140
LF3
F60/F65
SEATING
SOFT SEATING
RPTFE
NYLON
PEEK
PCTFE
SEALS
SEALS
RPTFE
FKM
HNBR
FFKM
Graphite
BOLTING
CARBON STEEL
B7/2H
L7/7
B7M/2HM
L7M/7M
L43/7

PRODUCT STANDARDS AND CUSTOMER SPECIFIC TESTS

STANDARD TESTS

  • HYDROSTATIC SHELL
  • HYDROSTATIC SEAT TEST
  • LOW PRESSURE GAS TEST
  • CAVITY RELIEF TEST
  • FUNCTIONAL TEST
  • ANTI-STATIC TEST

OPTIONAL TESTS

  • TORQUE TEST
  • ENDURANCE TEST (CYCLING)
  • DRIFT TOOL TEST (IF APPLICABLE)
  • HIGH PRESSURE GAS TEST
  • DRIVE TRAIN STRENGTH TEST
  • FUGITIVE EMISSION TEST
  • HIGH TEMPERATURE TEST
  • FIRESAFE TEST

CONTACT US

Please fill all field.
Please fill all field.
Please fill all field.
Please fill all field.
Please fill all field.
Please fill all field.
Please fill all field.
Please fill all field.
Please fill all field.
Please fill all field.
logo-hitvalve1.png
logo-hitvalve1.png

HIT VALVE S.p.A.

P.IVA: IT07521040969
© 2021, HITVALVE.COM

Addresses

Plant:
Strada per Terzago 5,
I-20083 Gaggiano, MI

Registered office:
Via Merendi 40,
I-20007 Cornaredo, MI

Contacts

T: +39 02 445768.1
F: +39 02 4456900
Email: info@hitvalve.com

For sales enquiries: sales@hitvalve.com
Career opportunities: careers@hitvalve.com

Search