HC
CONTROL BALL VALVES
API 6D/6DSS/6A

HC
Control Ball valve
Construction:
Design options:
- Forged body
- Anti-blow-out stem design
- High rangeability
- High flow capacity
- Self-flushing capability
Design options:
- Soft or metal seated
- SR, DPE (DIB-1) or dual seat (DIB-2) design
- Ambient, low or high temperature service
- Above ground or subsea service
Full port
High capacities and low pressure drops flow control.
Mono stage
Accurate flow control along with not so severe
anti-noise/anti-cavitation requirements.
anti-noise/anti-cavitation requirements.
High performance stage
Accurate control at small openings, managing high pressure drop with small flow.
Limiball
Superior flow-stream control and high flexibility for very severe regulating services, non-slurry service.
V-Port
Better precision in flow capacity at small openings.
Multi stage
Multi stage with multi path technologies.
Drilled ball
Limited vibrations between pressure controlling members, ensuring tightness performance, non-slurry service.
Learn more about our trims
click here to learn more about all the possibilities of our trims
Trim design has to be selected as per specific project working condition.
HIT VALVE will support Customer requirements in any phase of engineering processes, in order to optimize also trim selection and performance of required valves.
HIT VALVE will support Customer requirements in any phase of engineering processes, in order to optimize also trim selection and performance of required valves.
FINITE ELEMENT ANALYSIS
Traditional design procedure is integrated with Finite Element Analysis into the design cycle of our products in order to support continuous improvements in terms of quality, safety, cost effectiveness and reliability.
Structural analyses were performed on the valve components in order to evaluate their strength under high pressure loading and to optimize the design.
Structural analyses were performed on the valve components in order to evaluate their strength under high pressure loading and to optimize the design.
TECHNICAL SPECIFICATIONS
SIZE RANGE & PRESSURE RATINGS
HC-1 Full port
SIZE
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
HC-2 V-Port
SIZE
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
HC-3 Mono Stage
SIZE
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
HC-4 Multi Stage
SIZE
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
HC-5 High performance stage
SIZE
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
from 2" to 60"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
HC-6 Drilled ball
SIZE
from 2" to 6"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
from 2" to 6"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
SIZE
from 2" to 24"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
from 2" to 24"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
HC-7 Limiball
SIZE
from 2" to 24"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
from 2" to 24"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
SIZE
from 2" to 24"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
from 2" to 24"
WORKING PRESSURE RATINGS
Up to ASME Class 2500/API 10000
TEMPERATURE RANGE
LOW TEMPERATURE
down to -125°C
HIGH TEMPERATURE
+ 400°C
down to -125°C
HIGH TEMPERATURE
+ 400°C
OPERATION
Manual lever, gearbox, actuator
[electric, pneumatic, hydraulic, gas-over-oil actuators]
[electric, pneumatic, hydraulic, gas-over-oil actuators]
MATERIAL SELECTION
BODY
CARBON STEEL
A105
WCB
LCC
LF2
LF3
F60/F65
WCB
LCC
LF2
LF3
F60/F65
STAINLESS STEEL
DUPLEX SS
SUPERDUPLEX SS
NICKEL ALLOYS
TITANIUM
BALL/SEATS
CARBON STEEL
A105
LF2
LF3
F60/F65
LF2
LF3
F60/F65
STAINLESS STEEL
DUPLEX SS
SUPERDUPLEX SS
NICKEL ALLOYS
TITANIUM
OTHERS
STEM
CARBON STEEL
4140
LF3
F60/F65
LF3
F60/F65
STAINLESS STEEL
DUPLEX SS
SUPERDUPLEX SS
NICKEL ALLOYS
TITANIUM
OTHERS
SEATING
SOFT SEATING
RPTFE
NYLON
PEEK
FKM
HNBR
FFKM
PCTFE
NYLON
PEEK
FKM
HNBR
FFKM
PCTFE
METAL SEATING
SEALS
SEALS
RPTFE
FKM
HNBR
FFKM
Graphite
FKM
HNBR
FFKM
Graphite
BOLTING
CARBON STEEL
B7/2H
L7/7
B7M/2HM
L7M/7M
L43
L7/7
B7M/2HM
L7M/7M
L43
STAINLESS STEEL
SUPERDUPLEX SS
NICKEL ALLOYS
TITANIUM
OTHERS
PRODUCT STANDARDS AND CUSTOMER SPECIFIC TESTS
STANDARD TESTS
- HYDROSTATIC SHELL
- HYDROSTATIC SEAT TEST
- LOW PRESSURE GAS TEST
- CAVITY RELIEF TEST
- FUNCTIONAL TEST
- ANTI-STATIC TEST
OPTIONAL TESTS
- TORQUE TEST
- ENDURANCE TEST (CYCLING)
- DRIFT TOOL TEST (IF APPLICABLE)
- HIGH PRESSURE GAS TEST
- DRIVE TRAIN STRENGTH TEST
- FUGITIVE EMISSION TEST
- HIGH TEMPERATURE TEST
- FIRESAFE TEST